bladejason39

Replacement Keys For the 03-11 Saab 9-3 If you lose your car keys, it's essential to replace them right as soon as possible. This can save you a lot of money in the end. Many owners of the Saab 9-3 03-11 have trouble finding an authorized source for replacement keys. It's not as difficult as you imagine to add a new key to your Saab. You'll need a flathead, and patience. Replacement cases for the SAAB 9-3 key fob Saab owners are advised to always keep an extra key in case of losing the only key that works can be costly. Saab keys are more difficult to duplicate than traditional keys for cars, and come with an immobilizer that only the owner is able to disable. The key is an electronic device that communicates with the car's computer, and it comes with a chip which is unique to each car. Fortunately, replacing the case with a Saab 9-3 key fob is an easy job that doesn't require special tools. All you require is a flathead screwdriver open the case. Just be careful not to scratch the electronics inside. After the case has been removed, you can replace the battery and rebuild the SAAB 9-3 key fob. You can purchase a new case online for your vehicle key fob, but beware of items that are advertised for this model. These products may not be compatible with your vehicle, as they are not SAAB-approved. In saab 9 3 key replacement , they could cause irreparable damage or destruction to the electronic components in your car. Instead, search for genuine Saab parts that come from reputable suppliers. This will ensure that your replacement part is of highest quality. The best way to go is to find an experienced locksmith local to you in Saab. Remove the emergency key from your SAAB 9-3 keyfob The 03-11 SAAB 9-3 was a gorgeous car, and lots of them are seen all over the globe. One of the most common issues for this car is the key fob, which is prone to wear out quickly. There is a simple and inexpensive solution to this issue. Simply replace the case of your SAAB 9-3 key fob, and it will be as new again! The SAAB 9-3 key fob is a small remote control for your vehicle that comes with an manual key for opening the doors and starting the engine. It is easy to make duplicates of this key, however it is much harder to duplicate the electronic component. The electronic parts of these keys are protected by a specific chip, which prevents anyone from copying them without the Tech-2 tool approved by Saab. A dealer can add a second key for the price of Saab, but the cost is a few hundred dollars. This is due to the fact that it requires a new CIM Module and a key with electronic. However, you can save money by taking the emergency key off the SAAB 9-3 key fob and reprogramming it. To do this, simply insert a flathead screwdriver in the slot located in the middle of the case, and then gently open it. How do you change the batteries in the SAAB 9-3 keyfob Losing your car keys or lost could be an extremely frustrating experience. It can also be expensive when you visit the dealer for a new key. If, however, you are fortunate enough to find a spare key, AutoLocks LTD can provide you with the replacement key you require at 75% less than the price the dealer will charge. It is simple to change the battery in a SAAB 9-3 keyfob. First, you must remove the emergency key. Press the blue button on the key fob to do this. This will open the emergency key that you will then take out. Be sure not to spray the emergency key with liquids. This could damage the electronic components. Then, take off the plastic cover on the back of the key fob. This can be accomplished with an screwdriver. Once you have removed your cover and the cover is open, you can access the case to change the battery. You should use an screwdriver that has a flathead to avoid damaging the plastic. If you only have one working key, it is best to consider adding another. You'll save money in the end. It's cheaper to purchase another key than to replace the key fob, and you don't have to worry about having it programmed by a dealer. Replacing the SAAB 9-3 key fob It's a good idea purchase a spare key to Saab 9-3 vehicles which only have one key. Making a new key is not cheap, but it's much less expensive than replacing the entire vehicle. You will need a special tool called Tech2 to create a new ignition key. A new CIM module is required, as well as an ignition that is new. The only key that can be programmed to the car is the latest one. It cannot be used on a different vehicle. To replace a Saab 9-3 key fob, the user must contact the dealer's customer service department and set up an appointment for the replacement of the sole car key. The technician will need the unique code for the new key. They could also require replacement of the CIM or TWICE module. Dealers will also need to reprogram the ignition cylinders to accept the new key. It is easy to change the battery inside your Saab 9-3 keyfob. You can remove the emergency key by using the flat-head screwdriver. Then, put the screwdriver into the slot found in the middle of the Fob and gently move it around. After a few minutes, the case will split, and you will be capable of accessing the battery. It is important to note that you shouldn't put liquids on the Fob because this can damage the electronic components inside.